Basic steps of dissolving potassium bisulfate base modified tablets in water

過硫酸氫鉀底改片溶于水中的過程，為了保證操作，應該按照嚴格的溶解步驟進行。那么，今天就來為大家介紹一下其在水中溶解的步驟。那么，具體是什么樣的步驟呢？下面我們就來為大家介紹一下這個問題吧。

The dissolution process of potassium bisulfate base modified tablets in water should be carried out in strict dissolution steps in order to ensure operation safety. So, today, let's introduce the steps of its dissolution in water. So, what are the specific steps? Now let's introduce this problem to you.

1、過硫酸氫鉀底改片往水里加，一邊加一邊拌和，避免部分過熱，直到徹底溶解。

1. Add potassium bisulfate primer into water and mix it at the same time to avoid partial overheating until it is completely dissolved.

2、少數溶解時是不會濺出來的，在進行溶解時有必要是將參加水中，制止將水參中（這和濃硫酸稀釋是一個道理）。其容器選用塑料原料的。

2. A few will not splash out during dissolution. When dissolving, it is necessary to join the water and prevent the water from being diluted with concentrated sulfuric acid. The container is made of plastic materials.

3、若是需求固定容量的話，水少一點，等溶解完后，冷卻，再用水定容就好了。

3. If a fixed capacity is required, it is better to use less water. After dissolution, cool it and then use water to fix the volume.

過硫酸氫鉀復合鹽的儲存：

Storage of potassium bisulfate complex salt:

過硫酸氫鉀應該儲存在陰涼通風的庫房里。遠離火和熱。防止陽光直射，包裝密封。應分別存放在氧化劑和堿液中，避免混合存放。儲存區應配備適當的物料收集和滲漏。

Potassium bisulfate should be stored in a cool and ventilated warehouse. Keep away from fire and heat. Prevent direct sunlight and seal the package. They should be stored separately in oxidant and alkali liquor to avoid mixed storage. The storage area shall be equipped with appropriate material collection and leakage.

應急處理：隔離泄漏區域，限制進出口。應急人員戴防塵口罩、防酸套裝。不要直接接觸泄漏。小泄漏：避免灰塵，仔細清掃，收集在干燥，清潔，覆蓋容器。大量滲漏：廢物處置場的收集、回收或運輸。

Emergency treatment: isolate the leakage area and restrict the import and export. It is recommended that emergency personnel wear dust masks and acid proof suits. Do not touch the leak directly. Small leakage: avoid dust, clean carefully, collect in dry, clean and cover the container. Massive leakage: collection, recycling or transportation of waste disposal site.